Sponge iron fines annual sales growth

The production of iron by direct reduction, from which sponge iron is obtained, is newer than other methods of iron production, and its origins in the world date back to the 1970s. In direct reduction processes, coal or natural gas can be used as the reducing material, although the use of coal has a longer history. For more information sponge iron fines please visit our website.

Reasons for popularity of sponge iron fines

Given the shortage of scrap iron from which bars and other steel products are made, it is important to find a suitable alternative. Sponge iron is a product that can replace iron scrap in induction furnaces to make these products. Today, up to 50% of the sponge iron in induction furnaces can be replaced in waste. Sponge iron has also been used in casting three forms: billets, plates and rebars, and has made a big change in the industry. The compressed type of sponge iron, called briquette, has fewer transport problems and is easier to store.

In addition, the briquette has higher abrasion and rust resistance and is less likely to cause porosity (surface separation). Depending on the type of material and the temperature at which briquetting is carried out, there are three types of briquettes: Hot briquettes Cold briquettes Soft briquettes Hot briquettes are produced at temperatures above 650 ° C and are the best known and most widely used types of briquette. Cold and soft briquettes are made at room temperature, but the types of materials used in them are different.

Iron ore concentrate is the main raw material in the production of pellets, which, due to their fine particles, cannot be used directly in the reduction process. Pellets made from a combination of concentrate, iron ore, and several other additives are known as pellets. These pellets are first raw and then boiled and hardened and processed into sponge iron in the reduction process by the above methods. Pellets are therefore the raw material for the manufacture of sponge iron. Porous pellet sponge iron is also said to have specific mechanical and chemical properties for use in regenerative ovens.

Sponge iron, which is obtained from iron ore concentrate during processes, is used as a raw material for the production of various steel products. Due to the high volume of production and its lower price in the country, it is one of the suitable products for export and its trade has a good profit. However, its price, like all commodities, is a function of the state of the global and domestic economies. Further information sponge iron fines types fine parts can be found on our website.

Annual sales growth of sponge iron fines

Annual sales growth of sponge iron fines is very suitable and is exported from our country to other countries. The reasonable price of this product has caused it to have many fans, so you can Visit our site about the price of this product and sponge iron fines price.