High grade Hot rolled steel Domestic production

The preheating furnace is responsible for heating the part to the temperature required for rolling. A system should be designed for the furnace so that the ingots move inside the furnace and enter the furnace and reach the required temperature until the flames reach the end of the furnace. High grade Hot rolled steel our site for more information on domestic production.

Where is hot rolled steel used?

Ejector: This device is responsible for removing spark plugs that have reached the temperature required for rolling.

Peeling: This device is responsible for the removal of the skin created by different ways of casting and re-creaming.

Rolling bench: This device has a roller to wrap or reduce the thickness of the piece made using horizontal rollers.

Brick foot: This device is used to create relatively accurate dimensions in terms of the transverse and uniformity of the slab edges and which perform this task with vertical rollers.

Thickness gauges: This device is responsible for measuring the thickness of the produced sheet.

Twister: This device is used to bend sheet metal after production, performing this task with a few small rollers.

Cooling line: This line has the task of cooling the produced sheet metal designed according to local conditions.

Scissors: Responsible for sizing the sheet metal as well as cutting the head and end of the sheet.

Packing machine: This machine is responsible for automatically packing the produced sheet and the weight of the sheet. Heat treatment is required in rolling mills where the metal product changes too much physically. During hot and cold rolling processes, the metal product undergoes one or more heat treatments to improve the metallurgical structure and the physical and mechanical properties of the products. One of the most important thermal treatments is irradiation. More irradiation is done in the cooled materials.

Radiation has different qualities in steel production, these are: Radiation process In this process, the desired metallurgical structure and mechanical properties are created in the steel by placing the cooled steel at a temperature higher than the recrystallization temperature in a certain time. The important purpose of this process is to relieve and restore the stresses. Product specific properties of the material. This process takes place in continuous and box furnaces. Full shine The metal is heated and cooled for some time, and the final structure of the product will be coarse-grained pyrite.

In this case, the metal has good workability. Temperature irradiation In this method, the steel will cool faster than before and thus metallurgical conditions will change under isothermal conditions. In the irradiation type, a finer-grained pyrite structure is created. For more information on the advantages of hot rolled steel, visit our site.

Domestic production of High grade Hot rolled steel

Domestic production of High grade Hot rolled steel is done by our company, which has a high quality and has attracted many customers. Therefore, you can visit our site for more information about hot rolled steel process.