Superior iron mill scale affordable prices

The main process of Superior iron mill scale is the removal of moisture. This stage is carried out in the area of one and two pre-baking tunnels. Operation evaporation in the average temperature of 270 ° C. in the first and then the moisture measurement of surface and depth, re-in the area of the two at a temperature of 320 degrees Celsius, etc. can be done.

Unique Characteristics of Superior iron mill scale

And the iron pellets are dried during the slow moisture-proofing process without cracking. iron mill scale price are also placed in the primary section for dust mites in one-two-two zones. The two devices, VIBRATION SCREEN, with a capacity of seven tons per hour there is in this section that the pelletizing of size and gradation 6.5 Elie 16 mm from the grains are separate.

Pelletizing iron, the size is desirable or through the conveyor to the stage of loading the brazier are, or through the device STACKER with a capacity of iron mill scale buyers in a warehouse with a capacity of three hundred thousand tons are stored. Under enclosure, warehouse, conveyor machine, which is the opening of the floor of the warehouse the product pelletizing on the conveyor are moved, and from there by the conveyor, the other to the part of loading is transferred first to a silo concrete to the capacity of 900 tons, stored, and from there, with the arrival of Two silo equipped with a weighing system and record tonnage to the wagon that capacity, 60, or 90 tons, discharge, and finally by train, loading, and plant out to be.

Affordable prices of Superior iron mill scale

Pelletizing iron dried to the rotary kiln with the internal wall of the refractory bricks imported, and with the increase in temperature more than 1280 degree, sunny grad with a rotary motion on the grill exposed to heat torch, cooked, and with the conversion of magnetite to the decision quite hard and grill out. At this stage, the percentage of lime contained within the pelletizing that as the additive in the infancy stage of the production of pelletizing the concentrate, the added iron was, splits, and percentage of the CO2 from the pelletizing out to be.

The steps and complete process of producing iron ore pellets were expressed in the section described above. The conversion of iron ore concentrate into iron pellets is mandatory to prepare its use in the process of steelmaking. Because iron concentrate does not have direct usability due to its very fine granulation in melting and regeneration units. Of course, as we mentioned frequently in earlier articles, only the consumer of iron ore pellets are not high melting units with furnaces. Direct reclamation units that produce sponge iron (sponge iron is the feed of arc furnaces and induction) are also charged from the raw material of the Iron pelletizer. In fact, sponge iron is obtained from the direct resuscitation of the Iron gland.