Steel beam Wholesale Market

The construction of steel structures has started in Iran many years ago and has undergone many changes in the way of calculation and execution over the years. One of the most important changes in recent years is the increasing use of honeycomb beams as sub-roof beams as well as main beams that are solely responsible for carrying gravity loads. Also, despite the lack of sufficient information about cutting frames made with honeycomb beams, a significant number of bending frames are made using these beams. One of the most important reasons for using honeycomb beams is the lack of sufficient variety in rolled profiles and also the economics of these beams, so that the cost of construction of these beams, including the cost of cutting, assembly and welding is less than the value of steel used. For more information about steel beam Wholesale Market, visit our site.

How much weight can a steel beam support?

The amount of beams used per square meter will depend on many factors. The most important factor to consider when calculating the consumable iron in the structure is the type of building in terms of metal and concrete. For example, in structures with steel frames, the amount of iron used is as follows.

If the steel frame is centered with bracing, regardless of the weight of the roof reinforcement, the weight of all the hardware used in the building is 70-40 kg per cubic meter. Determining the exact number of beams used is difficult and varies for each project. The relevant calculations are usually done by structural engineers for each project and delivered to you.

Also in concrete structures, if the concrete building is with a bending frame and shear wall, regardless of the weight of the roof reinforcement, the amount of iron consumed per square meter of the structure is about 35-60 kg.

For concrete structure, medium flexural frame, regardless of the weight of the roof reinforcement, about 40-55 kg per square meter of iron is required. The exact amount of beams used for concrete structures also depends on the type of structure and the type of beam used and the opinion of the project engineer and can not be said with certainty.

After determining the number of rebars used based on the type of building, it is important to calculate the price of iron. In addition to cost, you also need to consider quality, because the market for counterfeit steel products is already hot, and if used, it will have irreparable consequences. After determining the amount of iron consumed, taking into account wages and additional costs, you can calculate the total cost of construction of your structure.

To calculate the weight of the beam, it is necessary to refer to the specific weight listed in the table according to its type. For example, to calculate the weight of IPE20 with a length of 12 meters, the following formula is used.

• Beam weight = 22 * ​​40/22 (specific weight from Stahl table) = 268/80
• The following formula is also used to calculate the IPE18 beam with a length of 6 meters.
• Beam weight = 18.8 * 6 (specific weight from Stahl table) = 112.8

For more information about steel beam sizes, you can visit our site.

Bulk marketing of steel beam in 2020

Types of steel beams are used in various structures to increase flexural strength, so that normal beams are cut in the shape of a beehive, opened and re-welded together to produce new beams with higher capacity. For more information about Bulk marketing of steel beam in 2020, visit our site.