First rate steel slabs Wholesale price

It is a sectional and semi-finished steel product obtained from the ingot rolling process or continuous casting process. The price of iron, including plates, is affected by a variety of conditions. Unlike ingots and ingots, slabs are rectangular in cross-section, not square, and are used as raw materials in the production of flat rolled products, including coils and hot rolled sheets. For more information on First rate steel slabs Wholesale price, visit our site.

What are the features of First rate steel slabs

The boards are always rectangular and usually 16 cm or more thick. Sheets are used in many industries. Floor Similar to billets, forming processes take place in plates, but their rectangular shape is always preserved. Sheets usually form sheets after molding processes. Most plates are made of carbon steel, but stainless steel plates are also available. The chemical composition of the sheets varies, but most are made up of iron, chromium, copper, manganese, molybdenum, nickel, and silicon. Plates are usually identified by standard codes attached to the sheet.

The code added to the tile includes: Melting number: This number is engraved on the plate. Color Code: This indicates its grade or grade All plates must be free from cracks, weldments, shells, shrinkage voids and other surface and internal defects that cause deterioration in the quality of the final product. Sheet shrinkage joints should intersect at column openings from 650 mm to 1880 mm.

Casting machines make five melts every 297 minutes and then stop for 69 minutes, which is The width is the same and the production planning of the casting machines is such that the necessary balance for the use of operational resources will be maintained if not observed. This may be because the plate is sent for water cooling rather than water, and the water cooling sources face empty capacity. After casting, the plates must be cooled.

The process of cooling the floor varies depending on the quality. Grade 1 and 2 plates and some Grade 3 plates are cooled using water, which takes only 30 minutes. Plates at other temperatures are cooled with air for 3 days. After cooling, a percentage of the plates must be debugged and the so-called scarf. All slabs must be free of cracks, welds, crusts, shrinkage cavities and other surface and internal defects that lead to a deterioration in the quality of the final product. The standards of this product are different, each of which must include their characteristics and chemical composition. For more information on steel slabs price visit our site.

Wholesale price of First rate steel slabs

Wholesale price of First rate steel slabs has faced fluctuations for which the world currency is the main reason, but in our company it reaches the customer at a good price. Therefore, you can visit our site for more information about steel slabs for sale.