Steel stud Domestic production

Deck studs are produced in two ways: hot forged and cold forged. However, the cold forging method is better and more standard than hot forging; Since special and automatic equipment is used in its construction; So much so that the raw materials are produced from quality alloys and machines create them in a uniform and principle. For more information about steel stud Domestic production, visit our site.

Can you build a house with steel studs?

In contrast, the hot forging process is relatively unprincipled and does not meet the required standards. This method uses reinforcement that is heated at a high temperature to create it. This causes the weld to be unsuitable and never to be produced uniformly. The price of nails depends on the material, thickness, size and diameter. Their diameters are usually standard, but can be changed if ordered. Since prices are constantly changing, it is not possible to predict the exact price. However, at the time of writing, prices are estimated to be between 2,000 and 5,000 tonnes per meter.

Better to contact site support for more information. Nails are the newest and most cost effective steel fittings used in many industries. These products attach to the deck in just a few seconds, which is almost 14 times less than conventional models. Studs are much lighter than old connections, which makes their connection easier. Deck studs actually act as an interface to join galvanized sheets and concrete together seamlessly. This means that the connection of the steel deck to other components of the structure is made through bases called struts.

In addition, studs are used to transfer the shear force between steel and concrete, which is called shear force. The use of studs has several advantages such as high assembly speed, no pre-welding preparation required, force distribution in all directions, no deformation during welding, smooth welding and direct stud welding from sheet metal and deck. These unique properties have led to the replacement of stud welding patterns by studs. Standard studs are usually made of AWS.D1.1 and have the following mechanical properties: The percentage increase in length is more than 15%. It has a hardness of 27 joules at 20 ° C. Yield strength is equal to 350 newtons per square millimeter. Tensile strength is 450 Newtons per square millimeter.

All studs are made according to DIN EN ISO 13918. Standard dimensions are up to 125 mm and can be changed when ordered. Deck studs should be welded according to the stated principles; The recommended device for welding is the “Stud Welding” model. Nails are mostly used in the bridge industry, sawn walls and steel deck roofs. For more information on steel stud framing prices visit our site.

Domestic production of Steel stud

Domestic production of Steel stud is accompanied by unprecedented growth and we distribute these products to the market at a reasonable price. So you can visit our site for more information about steel studs Bunnings.